Quote:
Originally Posted by freakaftr8
I'm in the similar boat. Want to composite mod my Sony KV-2643R. RGB modify would be inputting the rgb signals into the neck board where the signals go from the mainboard I believe. I've heard of people attempting this with mixed results. pure RGB, but syncing would be done via mainboard where the IF video detector input goes.
Dont quote me on the IF part, but I believe its something like this.
|
Going to the neck board, wouldn't the voltages be different? I think RGB is 0.7v peak to peak. Even with that out of the way, I fear that route may end up with a picture slightly shifted.