|
Ok so I measured all the voltages for the 6V6 and the readings I got are stumping me and don't make any sense to me:
Measurements made in reference to pin 8 of 6V6 tube
Pin 1: 0 V
Pin 2: 6.7 VAC
Pin 3: 25 VDC Should be 205 VDC
Pin 4: 21 VDC Should be 225 VDC
Pin 5: -177 VDC should be -8 VDC
Pin 6: -0.219 VDC Should be 0 V
Pin 7: 0 V
Pin 8: 0 V
Disregard what I said earlier about pin 4, I made the mistake of measuring that in reference to ground rather than to pin 8.
And actually, I just figured my problem, I had C3 and C4 wired in backwards because C3 just now vented with a loud popping noise, which I'm surprised it took this long to vent.
|