Quote:
Originally Posted by vortalexfan
OK, so how the heck do I measure the voltages of the pins of the CRT's tube socket? There's a plastic cover over it that's riveted on and I don't want to break the CRT Socket.
Secondly which center terminal is the one for the brightness control? the inner or the outer?
|
There's 3 terminals on the brightness control. You want to measure on the center one, between the 2 outer ones.
Yes it's tough to measure on the CRT connector, which is why I suggested to find the end of R44 which is under the chassis and connected to a wire going up to the CRT socket.