[DeLorean00]

Hello, I am new here. I am working on an old Andrea Radio CVK12 TV console with 12LP4 tube that the base got ripped off when it was being moved before I got the tv. I have another 12LP4 so I can replace it but I wanted to try and fix this one first because this was supposedly a working unit a couple of years ago.

So the question I have is there are 5 wires left, is that correct? I see others are snipped off at the base of the tube. The other question is how do the wires route? See the attached picture, I am unsure how to figure which wire goes to which pin.

I have never run into this situation so I figured I would ask the experts over here before I make a mistake.

Thanks in advance!