Both relays are in and working, I need to tack them down a bit more for wire safety, ( the glue I had was too old
)
The" Elmenco bleached dynamite stick." is replaced and working OK now.
C4 & R106 now replaced with EXACTLY what the SAMs says.
I used to have the old R106 and a 56UF (called for 50uf) now has one listed as exact replacement, and replaced old 5.6k 3w R106 with a new 5w one.
however, after all this, it still has made no difference in not being able to get the r/g vert lines at top to line up perfectly. :/
still looks like this.
https://imgur.com/jtYPypZ
can't get closer.
I have tried diff placements of the conv yolk , still same in the end.
not sure what else to try.
