Quote:
Originally Posted by zeno
Start by checking the 87 volt supply. Schematic is fuzzy but it
looks to come from C25 & D5. C25 most likely & is a very common
fail on almost any solid state TV. Part of the problem may be the CRT
also but CRT's usually get better as they warm up.
|
Zeno, thank you for this pointer. I just checked this point on the schematic, and it reads 103v DC.
I take it this is higher than it should be, because you say it should be 87v?
Could this be the CRT overdriving now?
Thank you again!
Best,
AJ