|
After removing the chassis, I took out the B+ fuse and powered it up and all filaments lit. A good start but as the
old saying goes one step foward two back. The vertical output xformer was disconnected, and upon further testing
both windings are wide open. Yoke windings appear OK
Anyone have one they would sell? Emerson 738134/Thordarson 26S12 or ??? Nothing on that auction site, also sent a note to Moyer.
Well I then proceded to tack in 7 filter caps, nothing more and powered up and the radio and phono input both function
so there is some life. Will probably input a signal to see if TV mode produces any audio.
From my personal experience this is the first VOT I have come accross that is bad. Anything in particular that could have
caused this or was it just its time ? Could still use 354-7 folder
|