|
There doesn't appear to be any kine bias or brightness range adjustment. If it turns out more brt range is needed, there's a little bit of "engineering fudgery" that may improve it. Just jump a resistor from brt. control wiper to ground. I'd start with 2 meg to be conservative. Then work downward in R value till desired range is reached.
What it does is make the CRT cathodes more negative, hence the G1s more positive with respect to the cathodes.
Again a decade box would be handy
Last edited by old_coot88; 12-14-2019 at 11:26 PM.
Reason: Typo
|