Well, I just stopped by the office for a couple minutes and snapped some photos while I was there. I found one thing that needs to be fixed before I try again; a broken wire.
This is from yesterday when I unpacked it before reattaching the board:
https://imgur.com/tH0DubI
Here's that board now:
https://imgur.com/UHRPjyv
Here's the board those input wires connect to, on the side:
https://imgur.com/GKsTt25
Another internal board:
https://imgur.com/uwk6Q5d
Here's the best I can see of the side of the tube. Enough to know it's a Matsushita:
https://imgur.com/l6VHFAH
And here's the broken wire, which if I'm really lucky could be the source of the problems:
https://imgur.com/jglpBSc
Quote:
Originally Posted by WISCOJIM
That was a good discount!
|
How did you get it to show what I paid? I thought I knew a lot about using eBay but it doesn't show that for me on other peoples' purchases.
Quote:
Originally Posted by JohnCT
Do you have a schematic for this unit?
|
I don't have a schematic yet. I tried searching Conrac's site on the Wayback Machine but I didn't find any manuals. There's one on eBay but $22 for the manual plus $22 shipping seems high.