|
I got resistors from Mouser as well for my Westinghouse, but they are rather expensive like $20 for one of them. I also had to go with an 85MEG part in place of the 80MEG. It worked out OK, however. The problem I was having was the front panel convergence control being at the very end of its travel and not quite getting the convergence right. Now I can go either side of correct with the control. I still need to replace the 8MEG part on the ground side of the focus control for similar reasons ( can't get focus voltage low enough for good focus).
__________________
Erich Loepke
|