I was determined to find this cap so I spent a little time finding the values on every electrolytic around the flyback. Picture 1 from left to right are 820@25v, 68@35v, 820@25v. Picture 2 330@35v, 30@250v. None of them are what I'm looking for except maybe the 30@250v but I don't want to assume anything.
Quote:
Originally Posted by JohnCT
Some had the dual section, some didn't.
In any case, you can bypass the line right at the CRT socket. Add a 10uf/350 right on kine source line to ground.
John
|
John, not sure what you mean by kine source line, but my best guess is 13B which looks like it feeds R10,11,12 into Q1,2,3. I attached a picture of the back of the neck board. If you know off the top of your head where I would add the cap, I'll give it a shot. Otherwise no big deal, the picture is great as is, the bars only show up on a dark screen so I'm ok with just leaving it alone. I appreciate the input from everyone!