Kinda quiet in here.......
I changed some resistors, put a new HV Rectifier and damper in and farted around for an hour to get it to make a picture..........Turns out the ion trap was mis-adjusted. This set won't make a picture without it lined up right..D'oh!
It makes a good picture now, but I'm not watching it due to the burning resistor smell coming from it, I think it's the 150 ohm 1 watt resistor that goes between the vertical output transformer secondary center tap (or yoke) and the control grid on the vertical output tube. Vertical seems fine.
And yes the centering magnet needs adjustment