Quote:
Originally Posted by zeno
The set is covered in Sams 1472-1
Measure the CRT pins 2, 6, 11, 4, 5, & 13 for VDC.
Be sure your meter goes to at least 800V.
Next the 3 G-2 controls are on the CRT socket. Turn
one up all the way & see what you get on the screen.
Then put it back & report findings.
Zeno
|
Well I turned them up and all I get is the green, the red is pretty much dead, and the blue is pretty much dead, they barely show up on the screen, the green however is fine, and thats with the blue and red adjustments on the back turned all the way up...
