Quote:
Originally Posted by damen
If you have an issue with the vertical size,meaning, can't fill the screen with the size control, or, the picture is too tall and can't be pulled in, it may be necessary to replace the resistor for the vertical return circuit from the yoke. It's R522,a 1.8 ohm 2 watt in your 108 chassis, and R518, a 1 ohm resistor in the 118. Just swap them.
|
The vert size on the CTC108 filled out by adjusting the control, but I noticed that it's not centered, it's down too far. I can't find any way to center it by looking through the Sams. Do you think swapping these resistors will have an effect on the centering? Or is there some provision for adjusting it that I can't find?