Quote:
Originally Posted by Tom9589
Where is the fine wire coil that you repaired connected in the circuit? Is is in series with one of the other windings? I didn't see any separate coil shown in either the Rider or Sams schematic.
|
The coil is connected to the black wire on the yoke that goes to chassis ground. The coil only had the 1 end connected. The end near the worn through spot just ends. My guess is that the coil on the tube is some sort of a shield. But I really don't know.
The coil is not shown on any schematic because it is an integral part of the yoke assembly, again my guess.