[timmy]

Well on T4 I get nothing from both primary and secondary which I feel is odd because when a transformer goes usually there is at least one half would have some sort of reading, I get zero on both. So I guess this is the end of the road for this set. Ok, maybe I measured it wrong, the SAMs shows a red but I have no red on T4 I have green and blue on one side and white and yellow on the other side so I checked for ohms on the green and blue and its zero the same for the other 2 but if I cross over from one side to the other I get a reading, the green and the yellow or white its reads but I'm not sure if this is correct like other transformers. Maybe I got ohms crossing over because maybe there is a center tap . I need some light on this one befor I do infact give it up .