Quote:
Originally Posted by Magnavox300
Awesome! Thanks!!
I looked up the 2.7ohm and the 470K resistors that are under the 1B3 tube, and schematic is showing the 2.7 as a 1/2 watt and the 470K as a 1 watt;
Visually the 2.7ohm really looks like a 1 watt, but should I just replace it with a 1/2 watt like the schematic shows? That's all I have anyway, unless I order a 1 watt.
|
I worked on a lot of these old sets. I've yet to see a bad resistor in the HV rectifier filament circuit or a bad doorknob capacitor. Not saying it can't happen. I haven't worked on one in 50 years.
