Quote:
Originally Posted by JohnCT
Congratulations sir!
John
|
Thanks.
Last night I checked the HV and it is measuring a steady 25KV.
I just need to go after the tuner, stick this in the director cabinet and converge it...the convergence yoke is the only cable I don't have the fittings to make an extension for. My solution was to leave the one in the director cabinet unplugged and grab the yoke from the Seville to act as a dummy load for the chassis. The convergence yoke plug is essentially a 6-pin version of the battery connector on a tube Zenith transoceanic...I have a 5 pin cable and socket off an old Baldwin organ, but no 6-pin connector.
When I do get the Seville cabinet done and ready for 21AXP I'm going to need to do something about the pictured cable. There used to be a contract spring (curved piece of flat spring steel) coming from the center of the bullseye that broke off and has been lost... I'm considering trying to solder a flashlight spring on and see if that works.