Quote:
Originally Posted by bandersen
I read back through this thread and saw that you did check the 470K in series with the HV lead. I've seen those resistors act weird. Possibly as a result of carbon tracks from years of HV around them. Wouldn't hurt to replace it or jump it. Ditto to jumping the 2.7 ohm on the 1B3. Something is limiting your HV current.
|
Thanks, I will change out that 470K just in case, I think it measured 450K; and i'll jump the 2.7 like Old Coot suggested and see what i get...
First I'll look to see if the 1B3 tube has a glow at all, forgot to do that...