|
I thought I'd try something. Since the space for the lytics, in the bottom front edge of the set is so confined and tight, I wasn't crazy about installing a terminal strip down there. Instead, I wanted to see if I could build something that could occupy the multisections' former spot, so I mounted all 4 caps, in this case, to a perf board to make a kind of plug and play module. I made a ground bus on the reverse of the board, to which all the negative terminals are connected - connecting leads to each of the 4 positive terminals. Ground and the 4 leads come out one side. The leads will have quick disconnect terminals, and the whole thing is inclosed in shrink tubing.
We'll see how well it works out...
Also, posting a picture of my notes on the listed vs measured value, plus ESR for all.
|