|
A week ago Sunday I assembled it and tried to adjust the dynamic convergence...It seems like only the blue H amplitude control behaves as it should (vertical seems to be okay).
I decided that I'm not going to sort about the dynamic convergence being poor. I ran it through the whole Wizard of OZ and at the end installed the back it was then that the only 2 original capacitors (the B+ doubler caps) decided to fail so the next morning I changed them and then gave it another OZ run through (this time with a little less pointless letter/pillar boxing from my settings challenged Blu-ray player. The next couple of days I gave it some run time too. Last time I ran it green seemed too strong in the grey scale.... I'm eventually going to check the green video tube as I changed its B+ resistor to match the red tube and sams (it matches the RCA issued schematic) to try and improve green demodulation response.
At some point hopefully soon I'm to try to spruce up the Seville cabinet....After t tubes I need for the director chassis arrive I'll try to make the director chassis work better than the Seville chassis does then I'll pull the Seville chassis out of the director and try to have both my CTC4s working....
|