|
OK So a little update on this Signal Generator:
My SG-8 is having some problems that may or may not be related to a modification I did to it to it so that I could have continuous Monitoring of the signal generator with a frequency counter, apparently the first 2 bands on the signal generator (Bands A and B) put out a 400 Hz test signal but its not very loud, and then Bands C-E don't put out any 400 Hz test signal at all just a loud humming noise that is somewhat affected by the RF Output Knob.
Any Ideas as to what could be causing this issue?
What say you Notimetolooz?
Last edited by vortalexfan; 05-08-2020 at 01:36 PM.
|