Quote:
Originally Posted by stushug
I had a service guy come over this morning, charged me $50 to tell me it's not worth fixing. That was all I needed to hear. I re-started from scratch and re-did the whole process until I got the grid almost perfect. Now I have the picture centered horizontally and vertically. The problem now is that the left side of the screen is perfect but on the right side I can see red and blue bleeding off to the right. It gets worse as you look from the middle to the right side. From the middle to the left side I can't see any of the red and blue bleeding. The bleeding doesn't seem to show on the grid, though.
|
Can you take a photo of the convergence board?
Also, take a pic of the screen grid with the blue lens covered up. We'll work on the red first. I want to see if that TV has right side specific adjustments as well as global adjustments or only global width and linearity. I wish now I hadn't pitched that service manual.
John
EDIT: was the guy who charged you $50 an old timer, or a flat screen board jockey? I can converge that TV in 10 minutes as could most guys who lived those years in the trade.
.