View Single Post
  #2  
Old 06-22-2020, 06:59 AM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Look right down the throat of the lenses and see if the shading is on the faceplate of the tubes to be sure it's an electrical problem and not some dirt inside the lens.

Generally speaking, most problems with shading from left to right are due to a bad bypass electro off the sweep that modulates the video level at the horiz rate.

Since this TV has (I believe) a SMPS that runs at the horiz rate, a bad capacitor could be there as well.

Capacitors also improve with temperature, so the reduction in shading as the TV warms is a good indication of a weak electrolytic.

John
Reply With Quote