Quote:
Originally Posted by old_coot88
It'd work, but with excessive bass.
But by all means, first check continuity as suggested, from C11 to where it enters the IF can, and to resistor R22. And from the other end of C11 to the top of the vol control.
Measure from right where the leads exit the capacitor body
|
OK so everything checks out, according to what you said it should check out, nothing is measuring open from what I can see anyways.
I don't know if this would cause a problem or not but one of the wires coming out of one of the IF cans has crumbling rubber insulation and it does have some exposed wire although it's not touching anything.