Quote:
Originally Posted by old_coot88
Not sure what O.L. means. But if you suspect the capacitor, just parallel your .0033 and .0047. That'll make .008 which will give a tad less bass than the .01. Be sure and test the caps first.  |
O. L. is overload or out of range according to my manual for my digital multimeter.
Going between the side of the capacitor that attaches to the side going into the IF can and R22 I get 2.5 Meg, and then from the same side of the capacitor to the lower volume control lug (B- lug) I get the same reading 2.5 Meg, and then from that side of the cap going to the IF can to the top lug on the volume control I get 0.3 Ohms.