Quote:
Originally Posted by old_coot88
Just need to verify solid continuity (zero ohms) as indicated by the red lines in the shetch:
|
Well if you mean using the continuity test to see if it beeps when the test leads touch the connection, then no there isn't any continuity. I traced back to the B- source which was the filter can negative, and I get continuity up until where C13 attaches to R13 after that I don't get a beep from my continuity checker until I get to one side of C11 which gives me continuity between it and the upper Volume control lug.
Which I'm assuming is what you wanted to know.