Quote:
Originally Posted by old_coot88
Now that you've isolated which side of C11 the break is at, it's 99% gotta be in the switch.
On that cardboard spacer thingy, maybe a dab of 5 minute epoxy(?).
|
OK so I got the IF Can rewired and I cleaned the Radio/Phono mode switch and I put the radio back together and Its completely dead again, no reception whatsoever, and I made sure I wired the new wire in at the right spots and everything and I can't get any signal out of the radio whatsoever, not even a bit of static, the only noise it will make is the popping noise of the tone control switches being pressed and that's it.
I even tried fiddling with the phono/radio switch and its still not responding.
Any ideas as to what may have happened?