Quote:
Originally Posted by old_coot88
To jumper the switch, just trace the wiring. Trace it from where the signal wire exits the 2nd IF can and goes to the switch. And trace from C11 to the switch. Put the jumper across the appropriate two lugs.
If perchance you don't plan on using the phono, just leave the jumper in place.
|
I think I could probably find a replacement switch over at Mouser or Digikey.
Its just a standard 6 Lug SPDT Switch.
In fact here it is on Mouser.
https://www.mouser.com/ProductDetail...6%2FVdLw%3D%3D