Quote:
Originally Posted by vortalexfan
Ok, thanks! I might just do that. What wattage should I use for that plate resistor? They didn't specify a wattage in the service manual.
Also if the filter choke is bad, could I just replace that with a resistor?
Thanks.
|
Half watt should be more than enough. You could use a resistor but you won't get as much filtering with the stock value capacitors.
Here's an interesting post from over on ARF.
https://antiqueradios.com/forums/vie...hp?f=6&t=72312
Towards the end is an explanation of how to neutralize the set(as in Neutradyne). Good to know since the manufacture didn't include it in the Riders service literature. Actually they probably did include that process in a more complete service manual available to their dealers.