and it has arrived!
https://imgur.com/uLnQnvP
https://imgur.com/M6SRgo5
and I did a brief test, and it
IS new and good resistance wise, as what it should be on SAMS.
Chose a bit of Jay and Silent Bob Strike Back DVD to display for the test along with the ugly macrovision
When it comes to replacing the old with this one and it IS when and not IF, as it will happen sooner or later,
I already have a solid state focus rect, so why not go solid with the HV one when I replace the HOT?
with something like perhaps
http://hvstuff.com/100ma-30kv-100ns-...high-frequency
thus remove all heater loads from the FBT.