|
I'm still a bit stumped by the odd behavior of rf input vs direct video feed, and the way when there IS video via rf in, its very unstable and wavy on the screen and 95v is all over the place.
Granted, all the IF tubes are original and I have new ( tested good ) ones on the way, also the AGC KEYING, and tuner tubes, I also intend to replace cathode and plate resistors on both source tubes for the 95v line, not done it yet. Right now, there is only 1 filter electrolytic capacitor on the line , as original design, 40uf, I may add another 5uf in there.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|