|
I've been known to make frankensets out of 2 similar ones...case in point a Philco 37-60 is only different from a 37-61 in the graphics on the dial scale, and the tuning knob/shaft. The 60 has a single speed knob the 61 has a 2 speed dual concentric tuning knob. My 60 has good photofinish and was restored, but the 61 was basically a basket case. You can swap the geared tuning knob shafts between the two easily since only 2 screws hold the shaft on...the 1/2" tuning shaft hole on the 60 cabinet had to be drilled out to accommodate the 3/4" tail of the knob. Unless you have had 2 of these side by side like me you'd never know the difference, and upgrading it to a 2 speed concentric tuning knob makes it a more premium set.
Many people make 1 good set out of 2 bad ones of the same model and mix revision variations between production runs of models... how much of that you can tolerate depends on your taste.
|