Quote:
Originally Posted by vortalexfan
Disregard previous post, I figured out what the problem was, it was a faulty 9V Battery in my "B" Battery setup.
|
I've been following this thread from the very beginning. I would knock together a simple B+ supply using a silicon rectifier or bridge rectifier, two 20mfd electrolytics , 2200ohm, 1 watt resistor and 180 ohm, 1 watt before the rectifier.
Once you get all the problems straightened out, you can go back to using battery power.
I built one 65 years ago because of the high cost of "B" batteries.
Flashlite cells were only 15 to 25 cents at the time.
