Quote:
Originally Posted by zeno
Interesting symptoms. Almost looks like HVSD but usually that
will kill the set & latch it off until power reset.
1) post just the schematic.
2) check for cold solder joints especially the horz out & flyback area.
3) look for an electrolytic cap associated with the ON/OFF relay coil
power supply.
Odds are it should be an easy fix but take your time & stay on track.
73 Zeno 
LFOD ! |
Hi Zeno and thanks for all the responses posted on this thread so far. I have hope to fix it.
First, the TV is Sanyo DS19204, I missed one digit there.
1) Here-below is the schematic
2)
The first time I checked the capacitors, I checked all of them on the 120V sections and then everywhere else. I used my multimeter in ohmeter mode to detect a change in resistance. All electrolytic capacitors were ok but I will double check. I will look for the flyback area. For the ON/OFF relay coil power supply I can't locate it on the PCB at the moment. There is a power regulator (IC601), would that be what I am looking for?
reopening the TV now.
General Schematic
https://imgur.com/a/3t6izQ7
Detailed schematic
https://imgur.com/a/Mq7LEg5
Where I looked mainly for capacitors (120V area)
