Quote:
Originally Posted by Jon1967us
Yeah, all those resistors are within spec...
Good point on the inconsistency of voltages between sets. Also, currents can be altered by pot settings and whatnot, so...
I was reading your long troubleshooting thread about your set. Overall, what were your findings, from a high level? I saw that you were buying and subbing peaking coils and what not. What were your conclusions?
|
That's on the future “to do” list, to try and address the minor annoyances that are still there in my set, like replacing L13, that may or may not be damaged by the person who had it before me, re-do the grounding of the delay line so it's more OEM spec, replace the worn R131 (66meg 6kv) to get more focus range, check & most likely replace R70 , R71, C31, to try and get better blanking, check for any other leaky caps in the video output area, there is minor background shadowing with bright logos against darker backgrounds, but this may be normal/ unavoidable, as I have it in A/V bypass, the IF still needs alignment, but I don't have the tools for it, it WILL WORK, but has red smearing, so I have a signal relay at L9 and C53, and can go from tuner or A/V with a flip of a switch!