View Single Post
  #41  
Old 05-30-2021, 12:28 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,176
Quote:
Originally Posted by Jon1967us View Post
Q. - If you disconnect the signal to antenna do you get snow
on the screen? w/ or wo color? and do you get snow on sound?

A. This is what I get (minus the camera blanking bar) and no, I don't get snow on sound. I tested the mixer tube and I believe that was good. Don't know about the nuvistor...do they go bad? How would something in the tuner affect video and cause smearing?



if no, then you know where you need to go also. if yes then
I'm not sure I would go to AGC right now.
R56 that 22ohm job, do you have a good unbroken connection
from the tube pin through the socket, through the PC Foil to
the resistor wire 100%?

I'll double check the path to the 22k and scope around more with my analog tek.

You probably need to poke around
everything in the detector area, DC Scope readings on both
sides of the detector? do they seem right? Something out
of place in the signal? And yes use a real analog scope.
and stop turning coils, you could be tuning for that
streaking and making it worse. Never do that to a
tv or radio with a problem.
wait a sec...
did you just say you DON'T get hiss with no signal input?
I'm not sure what you mean by " and no, I don't get snow on sound."

If by that you mean no hiss, then you are in major weirdsville, cause you SHOULD!

even mine with the messed up IF does.
As seen here showing my weird power down Audio quirk.
https://www.youtube.com/watch?v=Oaw7LDRBB5c

IF you don't get hiss, then you have a lot more going on then just video.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote