I think Jon in Halifax had one also & took a pix of the lead dress on his.
It was untouched & still had the OEM wire ties. Its a good point though,
I have run across dress problems where the yoke wires got too close
to the CRT cathode lines & caused it. History is I had 2 of these back in the day.
In both cases the HV was worked on but the customer didnt want to pay
the extra to look into it . 30 yrs later 2 or 3 have popped up on the forum
but nobody has found out why.
Quote:
Originally Posted by damen
About the jailbars, I remember a similar problem many years ago that ended up being a lead dress issue. The yoke and convergence wires had to be kept away from the CRT socket cables, especially the yellow wires.
|