Quote:
Originally Posted by zeno
Here is what I see. The tripler is OEM. The date code ( 7314 ) puts
it in the range of the set being born with it. It also looks very clean.
Often they discolor or swell up when stressed by HV problems.
BTW did you change the hoz out. Its not original. There is a low ohm,
1.5 ohm IIRC & a 'lytic in the base circuit. The resistor should be a carbon or another non wire wound.
73 Zeno 
LFOD ! |
Yeah, I replaced the HOT. During the scoping for the jailbars, I shorted it. I am not sure if it was the original. At the time of death, I was unable to find an OEM, so I went the NTE route. Seems to be working fine, but I have a lead on an OEM if that is a better choice.
As for the "base circuit" I'm assuming you mean the for the HOT? If so, under it is a 600K 2KV capacitor and a diode. That's it. If not the circuit you're referencing, let me know.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|