Quote:
Originally Posted by Electronic M
I don't have a scanner and most people find my pictures illegible...This is covered in Sam's so you should be able to find a Sam's for it.
|
I did end up finding the sam's for it. And I took the bottom cover off and it looks pretty straightforward to recap. the main filter cap is a 50/50 MFD @ 385 VDC capacitor which only has one wire lead on each section and a resistor on one of the sections and that's it, besides the ground connection to the capacitor.
There's even enough room in the chassis to tack a terminal strip in there and wire in a couple of 47 MFD 450 V axial lead caps to replace the old filter cap can.