|
jr tech: L9 and L10 coils have exactly the specified resistance, R36 is exactly right, and I can't measure R35 because it's a resistor-through-coil. I could disconnect the coil to check the resistor, but I think it's more significant that the voltage before the L10 resistance is only 65 volts. L10 is also a resistor-through-coil, but it doesn't look that way on the schematic.
Notimetolooz: To make the wiring of R41 agree with the Telaide 17T1 schematic: From V11 pin 2 there is a 1 Meg resistor R39 which connects to a tie strip. That would be the connection point for R41.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
|