Quote:
Originally Posted by Yamamaya42
That may not work so well 
At least with what I have seen with my CTC-16XL and the GE-CTC15 clone, if the convergence is unplugged it caused a partial loss of vertical height, and threw everything out of wack, not sure if THIS set is the same way however.
found this out by forgetting to plug the damn thing in a few times! |
The CTC-5 is different from the CTC16. The CTC-5 has all the convergence circuits built into the main chassis and only the convergence yoke unplugs.
The CTC16 has the yoke hard wired to the convergence board which unplugs from the main chassis....Also IIRC the CTC16 remotely mounts a lytic that's important to the vertical on the convergence board for some reason.