|
As for the 23" Zenith TV, I finally got it out of the cabinet, and looked underneath the chassis, and it appears that there are only 7 paper caps in the whole TV Chassis (2 Bumblebee caps, 1 ceramic tubular cap, and 4 brown plastic tubular caps), the rest are either Brown or Yellow Ceramic Disc Caps or Mylar "Brown Drops" and "Orange Drops".
As for the Electrolytic Can Caps, one was a single section cap for the main AC Line Filter (that one tested bad with my ESR Meter), the second was a 4 section electrolytic can that had only one section that tested bad, and the last one was also a 4 section electrolytic can cap that had 2 sections that tested bad.
So as far as the electrolytic cans go, could I get away with just unwiring the bad sections and installing a terminal strip nearby that I could install the necessary replacement caps onto and wire the leads from the dead sections of the aforementioned can caps and then just continue to use the good sections of the original can caps, or should I just replace all of the electrolytics including the ones that still tested good yet in the original cans?
|