Quote:
Originally Posted by Notimetolooz
It is best to just go ahead and change them all rather than go through the trouble of having to remove the chassis again. Caps are really not that expensive compared to other things that sometimes have to be replaced.
In your question about the flyback cover that is falling apart, you will have to do something to support the centering magnet rings at the very least.
There is a thread somewhere here that show how someone built up a replacement cover for another type of set.
I have also seen a post about someone else that made a new cover using a 3D printer for another set.
|
You mean the yoke cover? Because that's what fell apart on the 23" Zenith of mine, I unfortunately don't have access to a 3D printer, let alone the design plans for this TVs Yoke cover.