Quote:
Originally Posted by ppppenguin
Basic advice so far is OK. Beware of a few sets that use an autotransformer rather than a double wound transformer. These sets will still have a live (hot) chassis despite appearing to have isolation from a transformer.
The main use of an isolating transformer is to allow the safe conenction of earthed (grounded) testgear. if you're just working on a live (hot) chassis set without testgear make sure the chassis is conencted to neutral and use an RCD (GFI).
An RCD (GFI) adds no potection when using an isolating transformer.
Don't trust the switch on the set - always unplug if you want to be sure the set isn't live.
NB: I'm in the UK so using UK terminology with US equivalents in brackets. With 230V over here we can get proper shocks  |
Thanks. I plan on going board to board in the TV looking at the B+ voltage as it passes from board to board. Each board has a ground and the set has a transformer, so I'm going to assume it is save as I scoped it years ago and never damaged the set or my scope. Fingers crossed.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|