[TinCanAlley]

Originally Posted by Notimetolooz

TinCanAlley, you said that many TVs before the 60s did not have transformers, that is somewhat backwards. It is more true that most TV before the mid 50s had transformers. The reason for having a design without a transformer is weight and cost. The more portable sets from the mid 50s on wanted to reduce weight so a transformerless design was used. Also tubes that worked on lower B+ became available so rectifying the line voltage or using a voltage doubler would work. Of course reducing the cost was always a factor.
Large screen consoles tended to have transformers.

This all changed however when solid state (transistor) TV came out, the transistors had to have a much lower voltage to operate on, a transformer was the only efficient way to get that.

When on the subject of isolation transformers be careful of confusing chassis ground with the power ground (earth) and power neutral.

Good to know. I was reading a few sources and one stated that sets from the 70s back were ones where transformers might not exist. I guess it is a case by case basis.