Quote:
Originally Posted by Yamamaya42
it would really help if you can link the Schematic on someplace like imgur or other such site, I have not seen one of those monitors since my very young teen days, and do not have quick access to docs, what I DID find, is CLOSE, but most likely not correct, there is NO way for the V at that point to be that high if the regulator is working correctly, the schematic I found shows 24.7 going into the regulator and 14.30 out, this goes to the HOT, but as mentioned, it's most likely CLOSE but not exactly what you have.
https://i.imgur.com/RLFCEKB.png |
That is the schematic I have. What I just discovered is this monitor needs a horizontal signal to produce a raster, so I'm assuming this means there is no way to do an accurate test without it being connected to a source for the HSynch?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|