Quote:
Originally Posted by Electronic M
Probably either the video amp chain, CRT bias circuit, or protection circuits have a fault.
It's anyone's guess without a schematic and voltage measurements.
Another possibility is if the CRT gets it's G2 bias from the B+ boost system and the boost diode and or filter failed that could cause no raster till shutdown. I had that problem on a roundy color TV once.
|
I searched and searched for anything on this monitor. I tried the suggestion of FCC ID, etc. Found nothing there that would indicate it being anything other than a CRT device. So finding a schematic is out of the question.
I will redo all the voltages as it now has a signal. Hopefully they will be different than when there was no signal.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|