Quote:
Originally Posted by Electronic M
This era of Zenith used a barrel connector for tuner B+ and 2 identical spade connectors (aside from wire color) for AGC and tuner heater. If neither of the tuner tubes or tuner bulb lights you may have the tuner and AGC spade connectors on the tuner mixed up. I made that mistake in the last month and it didn't damage anything.
|
I'm thinking that might be part of my problem. Do you have a diagram or a picture showing which wires go where when it comes to the heater and AGC wires for the tuner?
Also another issue I noticed with this TV's tuner was that the section of the terminal strip where the B+ connector goes to was broken so the terminal is just floating in mid air, and only being held into place by the 3 large resistors soldered to it.
Also is the motorized tuning portion of the tuner affected by the 3 tuner connectors or is that independent of that?