Quote:
Originally Posted by Tom9589
One other important connector on the tuner is the IF output. It will be a shielded cable with most likely an RCA style plug on the end of it. So you have four connections on the tuner: IF output, filament, B+ and AGC. If the Sams is new enough, all of the connections will appear in the upper lefthand corner of the schematic.
The motorized tuner mechanism is completely separate from these tuner connections.
|
The IF Connection is was an obvious connection (the only connector that has an RCA Style connector), same for the B+ Connector the only connectors that aren't as obvious are the AGC and the Filiment connectors, and the Sam's copy I have doesn't list the connections anywhere on the Photofact.